test
Via Provinciale Sud, 5 - Bagnolo in Piano (RE) Italy
itfren

ISOCOPPO TEK - 15 MM TILE-SHAPED INSULATED SANDWICH PANEL

IsoCoppo Tek is an insulated sheet that externally looks just like a traditional tile in shape while inside it is covered with a polyurethane insulating layer of a medium thickness of 15 mm. Suitable for building homes and re-roofing old coverings where there are landscaping restrictions thanks to its main characteristics, which are:  reduced noise, a reduced condensation effect and reduced damage from hail, hot ventilated roof effect, treadability and load capacity.

  1. Side ring seal.
  2. 15 mm high density insulation.
  3. Inner sheet in centesimal aluminium.
Total width / useful width 1039 mm / 985 mm
Standard lengths 2230 mm, 2580 mm, 3280 mm, 3980 mm
Initial / end section 200 mm / 280 mm
Minimum slope 15 %
Material prepainted steel, prepainted aluminium

Fixing on wood

Side overlap of half a corrugation

Modular overlap

Isocoppo Tek can be installed over metal or wooden structures the recommended spacing of the supports must be 700 mm.

TOP FINISH COLORS

Standard tile red

antiqued tile red

antiqued sand

For information about the product or to request a quote please fill out the form below.

    I have read and accepted the privacy.

    category index

    IsoCoppo Tek is an insulated sheet that externally looks just like a traditional tile in shape while inside it is covered with a polyurethane insulating layer of a medium thickness of 15 mm. Suitable for building homes and re-roofing old coverings where there are landscaping restrictions thanks to its main characteristics, which are:  reduced noise, a reduced condensation effect and reduced damage from hail, hot ventilated roof effect, treadability and load capacity.

    1. Side ring seal.
    2. 15 mm high density insulation.
    3. Inner sheet in centesimal aluminium.
    Total width / useful width 1039 mm / 985 mm
    Standard lengths 2230 mm, 2580 mm, 3280 mm, 3980 mm
    Initial / end section 200 mm / 280 mm
    Minimum slope 15 %
    Material prepainted steel, prepainted aluminium

    Fixing on wood

    Side overlap of half a corrugation

    Modular overlap

    Isocoppo Tek can be installed over metal or wooden structures the recommended spacing of the supports must be 700 mm.

    TOP FINISH COLORS

    Standard tile red

    antiqued tile red

    antiqued sand

    category index

    Made by Quantik 🚀

    Lasciaci il tuo numero di telefono. Ti chiameremo non appena un operatore sarà disponibile.







      Lasciaci il tuo numero di telefono. Ti chiameremo non appena un operatore sarà disponibile.