NOTCHED VERTEX RIDGE
To be used on the apex of the two pitches; its notched shape ‘closes’ the corrugations . Supplied in 2 elements to be assembled on site, it allows to avoid that the two opposing pitches are perfectly symmetrical. Development 812 mm.
DIAGONAL RIDGE CAPPING
To be used for joining the pitches, both apex and diagonal. It consists of a central part and two microcorrugated side skirts in a special material that can be manually adapted to any corrugation shape, whatever the slant or angle. Total development: 806 mm
RIDGE HEAD
Closing component, both at the beginning and end, for both vertex and diagonal ridges.
WALL CONNECTION
Connecting component between a vertical wall and the roof pitch. Development: 312 mm
CORRUGATION CLOSURE
PLEXIGLASS DOME FOR SKYLIGHT
Passage element for inspection on the roof or to illuminate the room below, simple wall, with manual opening.
SKYLIGHT BASE
The dome is not included in the base but sold separately. See accessory number 6.
CHIMNEY CONVERSE BASE
Metal pressed element in two pieces, with outer edges matching the Coppo-IsoCoppo line. Sold in 2 pieces.
COPPO VENT BASE
PVC component with its own EPDM seal, to use as the vent base; suitable for the application of vent and cap.
VENDUCT VENT
PVC component with snap-in mechanism and water guard, to fit on the vent base. Max. operating temperature 60°.
ANTENNA COVER
PVC component to fit on the “Coppo vent base” for the antenna.
SNOW STOP
PROFILED SNOW STOP
Development 417 mm.
POLYCARBONATE SHEET
Thermoformed element in compact, transparent polycarbonate.
COMB BIRD SCREEN
PVC comb-shaped element. Can be supplied in aluminium OR copper version. Specific for ventilated roofs.
DRILL FIXINGS
“Alublok” system for fixing sheets or panels on wooden structures. Available in steel or prepainted stainless steel with a tile red color.
SELF-TAPPING FIXINGS
“Alublok” system for fixing sheets or panels on metal structures. Available in steel or prepainted stainless steel with a tile red color.
SPRAY CAN
Spray color can for touching up.
