SottoCoppo Insulated version is a logical evolution: a layer of polyurethane foam insulation in a continuous process makes it possible to bring new features to the product, such as: reduction of condensation, increased walkability, increased resistance to racking loads and better thermal rinsulation.
Sottocoppo Insulated version is automatically supplied with the end of the sheet without the insulating layer, creating a “anti-drip” effect nand ensuring perfect overlap in the case of long pitches.
DIMENSIONS:
| Profile height | 32 mm |
| Total width | 869 mm |
| Useful width | 777 mm |
| Minimum / maximum sheet length | 1520 mm / 6310 mm |
| Sheet standard length | 1520 / 2130 / 2440 / 2750 / 3060 / 3990 mm |
| Stringer profile standard lengths | 1344 / 1932 / 2268 / 2520 / 2856 / 3780 mm |
| Overlapping | Tutte le lastre predisposte con 180 mm di overlapping destro |
| Use minimum slope | 15 % |
| Polyurethane thickness | 13 mm |
| 0.6 mm prepainted steel sheet weight | circa 7,4 kg/m2 |
| Steel stringer weight | circa 0,31 kg/ml |
| External support | prepainted steel |
| Internal support | white finish centesimal aluminium |
| Available finishes | red tile |
| Recommended use | roofing |
Lateral overlapping
Installation with mortars or polyurethane adhesives
Installation with hooks
ADVANTAGES
- Condensation reduction;
- High thermal resistance;
- Waterproof even at low slope (minimum 15%);
- Walkable and resistant without risk of breakage;
- Ventilated with safe anchorage of the tiles thanks to the stringers;
- Lightweight solution compared to the classic brick under tile, in fact it weights only around 7.4 kg/m2;
- Possibility of fitting the brackets for photovoltaic installation in the corrugations of the sheet;
- High resistance finishing available on demand.
| Schema statico | Spessore acciaio preverniciato[mm] | Interasse appoggio [m] | ||
|---|---|---|---|---|
| 0,5 | 1 | 1,5 | ||
| 3 appoggi | 0,6 | 821 | 291 | 153 |
| 4 appoggi | 0,6 | 968 | 352 | 183 |
Deformation limit equal to L/200
Load including a layer of tiles (about 30 kg/m2)
Reference standard EN 1993-1-3; 1-2; 1-4
The content of this calculation table is to be considered as a rough guide and with a simple indicative value. It is the responsibility of the technical engineer and/or user to carry out the relevant structural calculation for the individual cases of use and to determine the design specifications of the roof solution.
Thanks to the possibility of installing full-length sheets, laying times are drastically reduced and absolute waterproofing of the roof covering is guaranteed.
Lateral overlapping
Front overlapping
Initial hook
Available for tiles with an approximate thickness of 15 or 20 mm
Intermediate hook
Available for tiles with an approximate thickness of 15 or 20 mm
Bird screen
Snow barrier
For information about the product or to request a quote please fill out the form below.
Fibrotubi sfruttando il know how del metallo ha rivoluzionato il mercato con una soluzione applicativa da sottocopertura che risolve tutti i problemi fino ad oggi esistenti sui materiali in commercio, cioè il peso, la fragilità e le dimensioni dei sottocoppi tradizionali che portavano comunque il coppo a scivolare con il tempo verso il basso.
Il sistema Sottocoppo metallico è studiato per essere impermeabile, pedonabile resistente e ancorare il coppo nel tempo, con possibilità d’installazione di staffe per fotovoltaico.
Ogni lastra di Sottocoppo porta N.4 correntini già preforati per l’ancoraggio dei coppi tradizionali e il fissaggio. Il correntino è sempre più corto della lastra e va installato sull’onda alta in modo da lasciare vuota una parte, in base all’installazione e al sormonto.
DIMENSIONS:
| Profile height | 32 mm |
| Total width | 869 mm |
| Useful width | 777 mm |
| Minimum / maximum sheet length | 1520 mm / 6310 mm |
| Sheet standard length | 1520 / 2130 / 2440 / 2750 / 3060 / 3990 mm |
| Stringer profile standard lengths | 1344 / 1932 / 2268 / 2520 / 2856 / 3780 mm |
| Overlapping | Tutte le lastre predisposte con 180 mm di overlapping destro |
| Use minimum slope | 15 % |
| Polyurethane thickness | 13 mm |
| 0.6 mm prepainted steel sheet weight | circa 7,4 kg/m2 |
| Steel stringer weight | circa 0,31 kg/ml |
| External support | prepainted steel |
| Internal support | white finish centesimal aluminium |
| Available finishes | red tile |
| Recommended use | roofing |
ADVANTAGES
- Condensation reduction;
- High thermal resistance;
- Waterproof even at low slope (minimum 15%);
- Walkable and resistant without risk of breakage;
- Ventilated with safe anchorage of the tiles thanks to the stringers;
- Lightweight solution compared to the classic brick under tile, in fact it weights only around 7.4 kg/m2;
- Possibility of fitting the brackets for photovoltaic installation in the corrugations of the sheet;
- High resistance finishing available on demand.
| Schema statico | Spessore acciaio preverniciato[mm] | Interasse appoggio [m] | ||
|---|---|---|---|---|
| 0,5 | 1 | 1,5 | ||
| 3 appoggi | 0,5 | 627 | 219 | 116 |
| 0,6 | 821 | 291 | 153 | |
| 4 appoggi | 0,5 | 734 | 265 | 143 |
| 0,6 | 968 | 352 | 183 | |
Deformation limit equal to L/200
Load including a layer of tiles (about 30 kg/m2)
Reference standard EN 1993-1-3; 1-2; 1-4
The content of this calculation table is to be considered as a rough guide and with a simple indicative value. It is the responsibility of the technical engineer and/or user to carry out the relevant structural calculation for the individual cases of use and to determine the design specifications of the roof solution.
Thanks to the possibility of installing full-length sheets, laying times are drastically reduced and absolute waterproofing of the roof covering is guaranteed.
Initial hook
Available for tiles with an approximate thickness of 15 or 20 mm
Intermediate hook
Available for tiles with an approximate thickness of 15 or 20 mm
Bird screen
Snow barrier
For information about the product or to request a quote please fill out the form below.
