test
Via Provinciale Sud, 5 - Bagnolo in Piano (RE) Italy
itfren

DOUBLE WALL WITH AIR GAP 10+10 MM
AISI 316L STEEL INNER SURFACE
OUTER WALL IN AISI 304 STEEL 
OR IN COPPER

STAINLESS STEEL AND COPPER MAT AIR SERIES
Material specification
Inside diameter (mm)*: 80•100
Outside diameter (mm)*: 100•120
Inner surface 0.5 mm nominal thickness
Quality 1.4404 (AISI 316L stainless steel)
Insulation 10 mm air gap with surface thermal resistance of 200°C equal to a dry air conductivity of: 0.026 m2K/W (300 K, 100 kPa)
Sealing ring Profiled ring seal with three black silicone sealing lips conforming to UNI EN 14241/1
Roughness 1 mm average value
General information
Installation Internal Yes
External YES it is rain proof
Fields of application Pipes, chimneys, smoke ducts, flues and manifolds connected to blown air, atmospheric, condensation and pressurised boilers, type B, C appliances, fireplaces, stoves, kitchen hoods, ovens and ventilation ducts
Permitted fuels T200 Gas, Diesel oil, LPG, Pellets
T600 Gas, Diesel oil, LPG, Pellets and Firewood
Conservation In environments with a non-corrosive atmosphere
Product warranty As per the 99/44/EC directive
Dangerous substances None
Freezing-thawing resistance Meets UNI EN 1856-1
Accidental contact Protective shields must be used when surface temperature is greater than 70°C
Storage Do not store the material near ferrous materials, premises must be dry and protected against the elements
Usage limits Do not use stainless steel flue systems for premises such as laundries, dye houses, furriers, printer’s, beauty salons or where there are halogen or chromium vapours/fumes
MAIN FEATURES

MAT AIR STAINLESS STEEL

  • Inner surface in 0.5mm thick AISI 316L BA stainless steel;
  • Static air insulation with double crown of mineral wool on couplings (10+10);
  • Outer surface in 0.5mm thick AISI 304 BA stainless steel.

MAT AIR COPPER

  • Inner surface in 0.5mm thick AISI 316L BA stainless steel;
  • Static air insulation with double crown of mineral wool on couplings (10+10);
  • Copper outer wall.

 

  • Reduced external dimensions.
category index 
MATDP AND DP COPPER SERIES – CHIMNEY SYSTEM WITH 25 MM THICK INSULATION
MATDP AND DP COPPER SERIES – CHIMNEY SYSTEM WITH 25 MM THICK INSULATION
STAINLESS STEEL AND COPPER MAT AIR SERIES – CHIMNEY SYSTEM WITH 10 + 10 MM AIR GAP
STAINLESS STEEL AND COPPER MAT AIR SERIES – CHIMNEY SYSTEM WITH 10 + 10 MM AIR GAP
STAINLESS STEEL AND COPPER MAT AIR SERIES – WITH AIR GAP 10+10 MM
AISI 316L STEEL INNER SURFACE
OUTER WALL IN AISI 304 STEEL 
OR IN COPPER
STAINLESS STEEL AND COPPER MAT AIR SERIES – WITH AIR GAP 10+10 MM
AISI 316L STEEL INNER SURFACE
OUTER WALL IN AISI 304 STEEL 
OR IN COPPER
MAIN FEATURES

MAT AIR STAINLESS STEEL

  • Inner surface in 0.5mm thick AISI 316L BA stainless steel;
  • Static air insulation with double crown of mineral wool on couplings (10+10);
  • Outer surface in 0.5mm thick AISI 304 BA stainless steel.

MAT AIR COPPER

  • Inner surface in 0.5mm thick AISI 316L BA stainless steel;
  • Static air insulation with double crown of mineral wool on couplings (10+10);
  • Copper outer wall.

 

  • Reduced external dimensions.
Material specification
Inside diameter (mm)*: 80•100
Outside diameter (mm)*: 100•120
Inner surface 0.5 mm nominal thickness
Quality 1.4404 (AISI 316L stainless steel)
Insulation 10 mm air gap with surface thermal resistance of 200°C equal to a dry air conductivity of: 0.026 m2K/W (300 K, 100 kPa)
Sealing ring Profiled ring seal with three black silicone sealing lips conforming to UNI EN 14241/1
Roughness 1 mm average value
General information
Installation Internal Yes
External YES it is rain proof
Fields of application Pipes, chimneys, smoke ducts, flues and manifolds connected to blown air, atmospheric, condensation and pressurised boilers, type B, C appliances, fireplaces, stoves, kitchen hoods, ovens and ventilation ducts
Permitted fuels T200 Gas, Diesel oil, LPG, Pellets
T600 Gas, Diesel oil, LPG, Pellets and Firewood
Conservation In environments with a non-corrosive atmosphere
Product warranty As per the 99/44/EC directive
Dangerous substances None
Freezing-thawing resistance Meets UNI EN 1856-1
Accidental contact Protective shields must be used when surface temperature is greater than 70°C
Storage Do not store the material near ferrous materials, premises must be dry and protected against the elements
Usage limits Do not use stainless steel flue systems for premises such as laundries, dye houses, furriers, printer’s, beauty salons or where there are halogen or chromium vapours/fumes
MATDP AND DP COPPER SERIES – CHIMNEY SYSTEM WITH 25 MM THICK INSULATION
MATDP AND DP COPPER SERIES – CHIMNEY SYSTEM WITH 25 MM THICK INSULATION
STAINLESS STEEL AND COPPER MAT AIR SERIES – CHIMNEY SYSTEM WITH 10 + 10 MM AIR GAP
STAINLESS STEEL AND COPPER MAT AIR SERIES – CHIMNEY SYSTEM WITH 10 + 10 MM AIR GAP
STAINLESS STEEL AND COPPER MAT AIR SERIES – WITH AIR GAP 10+10 MM
AISI 316L STEEL INNER SURFACE
OUTER WALL IN AISI 304 STEEL 
OR IN COPPER
STAINLESS STEEL AND COPPER MAT AIR SERIES – WITH AIR GAP 10+10 MM
AISI 316L STEEL INNER SURFACE
OUTER WALL IN AISI 304 STEEL 
OR IN COPPER