Eterinox - PPS Series Stainless Steel Air and Copper
Double polypropylene wall with a 10 + 10 mm air gap, with external stainless steel or copper.
PPS Stainless Steel Air
- Internal wall in PPS Polypropylene
- Static air insulation with a double crown of mineral wool at the joints (10+10).
- External wall in AISI 304 BA stainless steel, 0.5mm thickness.
PPS Copper Air
- Internal wall in PPS Polypropylene
- Static air insulation with a double crown of mineral wool at the joints (10+10).
- External wall in Copper.
Technical Data
| Material specification | |
| Internal diameter (mm): 80•100 | |
| External diameter (mm): 100•120 | |
| Internal wall: PPS Polypropylene | |
| Insulation: 10mm air gap, with wall thermal resistance at 200°C equal to a dry air conductivity of 0.026 m²K/W (300 K, 100 kPa). | |
| Sealing ring: Profiled ring gasket with three sealing lips in black silicone, compliant with UNI EN 14241-1 | |
| Roughness: average value 1 mm | |
| General information | |
| Installation | Internal: Yes
External: YES – resistant to rainwater penetration. |
| Applications: Ducts, chimneys, flue channels, collectors, and chimneys connected to forced-air boilers, condensation-type appliances, and kitchen hoods. | |
| Permitted fuels | T200 Gas, Pellet
T600: Gas, Diesel, LPG, Pellet, and Wood |
| Storage: In environments where the atmosphere is non-corrosive | |
| Product warranty: In accordance with Directive 99/44/EC | |
| Hazardous substances: None | |
| Freeze–thaw resistance: Compliant with UNI EN 1856-1 | |
| Accidental contact: Protective shielding is required when the wall surface temperature exceeds 70°C | |
| Storage: Do not store the material near ferrous materials; environments must be dry and protected from weather exposure | |
| Limitations of use: The use of stainless steel flue systems is not recommended in environments such as laundries, dry cleaners, furriers, printing facilities, beauty salons, or in any areas where halogenated or chromated vapors are present | |
Contact us
Request information or a customized quote
"*" indicates required fields
