Isocoppo Tek is an insulated panel that maintains the traditional coppo shape on the outside, while on the inside it is covered with an insulating layer of polyurethane with an average thickness of 15 mm. It is suitable for both civil use and the renovation of old roofs with landscape constraints, thanks to its key features such as: noise reduction, condensation reduction, hail damage prevention, ventilated warm roof effect, walkability, and load-bearing capacity.
Technical Data
| Total width / effective width: 1039 mm / 985 mm. | |
| Standard lengths: 2230 mm, 2580 mm, 3280 mm, 3980 mm | |
| Initial / Final section: 200 mm / 280 mm | |
| Minimum slope: 15%. | |
| Material: Pre-painted steel, pre-painted aluminum |
Features
Composition
1. Lateral gasket. 2. 15 mm high-density insulation. 3. Internal sheet in centesimal aluminum.
Lateral overlap
Half-wave lateral overlap
Recommended spacing
Isocoppo Tek can be installed on metal or wooden structures. The recommended spacing for supports should be 700 mm.
Finishes
Standard: Coppo red
Antiqued coppo red
Antiqued sand
Documentation
Contact us
Request information or a customized quote
"*" indicates required fields
