Double door kit and trolley kit
Double door kit
The double door kit allows the conversion of two single-door frames into a double-door frame, available for both masonry and drywall.
Sliding kit (for joiner)
The kit includes all the accessories and hardware required for the sliding mechanism and for assembling the door and frame. It is supplied as standard with all models and is included in the frame packaging. The load capacity is 120 kg, except for the Easy Line, which has a load capacity of 80 kg.
Lock kit
Mason’s kit
It is the frame installation kit, useful in case the inner package supplied with the frame is lost. Available in 4 versions:
Masonry kit for brick walls
(replacement)
Ecoplus mason’s kit
(replacement)
Drywall mason’s kit
(replacement)
Easy Line drywall mason’s kit
(replacement)
Clamp kit for glass door
Glass door clamp kit
The glass door kit allows the installation of a glass door (thickness 8–10–12 mm) without any wooden frame. The total load capacity is 80 kg. Not compatible with the Free Line, which has its own dedicated kit.
Glass door clamp kit for Orchidea Free flush-to-wall
The glass door kit for Orchidea Free allows the installation of a glass door (thickness 8–10 mm) without any wooden frame. The total load capacity is 80 kg.
Spacer kit for Orchidea Free flush-to-wall
The aluminum spacer kit with seals is designed to fill the gap between the glass door and the pocket frame. The kit is available in 2 versions: for single door and for double door.
Door stop kit
Door stop kit
End-of-travel door adjustment system (more or less open position).
Soft-close self-closing kit
kit door stop
End-of-travel door adjustment system (more or less open position).
Soft-close / damper kit
Soft-close / damper kit
The kit allows the door to be guided both during closing and opening, slowing its movement if excessive. Installation only requires removing the door. Applicable only to wooden doors. Two models are available: up to 40 kg and up to 60 kg.
Simultaneous opening/closing kit for double door
Simultaneous opening/closing kit
The simultaneous opening/closing kit allows both leaves of a double-door system to be opened or closed easily with a single movement. It can also be installed after the frame has already been fitted.
AppliSystem kit
AppliSystem kit – external sliding door system for masonry and drywall
AppliSystem is a solution that saves space by allowing doors to slide externally along the wall, without any masonry work. The kit consists of a raw tanganika wood horizontal beam and one or two vertical uprights (optional).
Jamb kit
Glass door jamb kit for drywall
Tanganika jamb kit for drywall, wall thickness 100 mm, for glass doors.
Jamb and architrave kit for wooden doors
The jamb kits are supplied in the maximum available width, allowing them to be cut to the desired size. The height is always 210 cm for all models.
Other kits
Dust brush kit
The dust brush kit (already included in the jamb kit) comes with black brush holders. Qty: 2 pieces, height 2,100 mm.
Seal kit
The seal kit for the receiving jamb (already included in the jamb kit) consists of 2 pieces, height 2,150 mm, available in black, walnut, and white.
Drywall screws
Bag with 50 drywall screws, 19 mm length.
Documentation
Contact us
Request information or a customized quote
"*" indicates required fields
