test
Via Provinciale Sud, 5 - Bagnolo in Piano (RE) Italy
itfren

Insulated sheets and panels

Tek 28

Tek28 is the corrugated metal sheet with 10 mm insulation, ideal for the realization of industrial and civil cladding and facades and for the renovation of old roofs. The polyurethane layer reduces the heat transmission of the sheet, producing a warm, ventilated roof effect. With the application also in the facade, it allows with a single product a double use, ideal also in renovations.

Minimum slope 7 %
Width 1000 mm
Useful width on site 893 mm
Standard lengths 2230/2580/3280/3980 mm
Material Prepainted steel

lateral overlapping of a corrugation and a half

fixing on wood

fixing on wall

ADVANTAGES

Excellent treadability

Hail damage reduction

Noise reduction

Condensation effect reduction

Thermal bridge elimination

Galvanic couples elimination

AVAILABLE COLOURS

SIMIL RAL 9002

White-Grey

SIMIL RAL 3009

Siena Red

SIMIL RAL 8017

Dark Brown

PREARRANGEMENT FOR THE OVERLAP

T = standard 200 mm

This picture is only given as an example and shows the final status of the product after the end insulating layer has been removed on the building yard (this is the case if more than one sheet is used for a pitch).
The removal of polyurethane is used for overlapping the sheets, and consists of pre-cutting the insulating layer with the application of adhesive tape on the inner surface of the metal sheet to facilitate the removal of polyurethane on site.

The removal of polyurethane is used for overlapping the sheets, and consists of pre-cutting the insulating layer with the application of adhesive tape on the inner surface of the metal sheet to facilitate the removal of polyurethane on site.

Laying direction

Consultation table for selecting the plate length:

length of the roof sheet length to use mm
4260 2230 2230
4610 2580 2230
4960 2580 2580
5310 3280 2230
5660 3280 2580
6010 3980 2230
6360 3280 3280
6640 2580 2230 2230
7060 3980 3280
7340 3280 2230 2230
7690 3280 2580 2230
8040 3280 2580 2580
8390 3280 3280 2230
8740 3980 2580 2580
9020 2580 2580 2230 2230
9440 3280 3280 3280
9790 3980 3980 2230
10140 3980 3280 3280
10420 3980 2580 2230 2230
10770 3980 2580 2580 2230
11120 3980 2580 2580 2580
11470 3980 3280 2580 2230
11540 3980 3980 3980

Straight translucent polycarbonate sheet, 1.1 mm thick, in neutral color for profile 28
– max. length 12m

Notched vertex ridge in pre-painted steel
– white grey
– Siena red
– dark brown

Steel flat ridge
– white grey
– Siena red
– dark brown

Notched wall/pitch connection in pre-painted steel
– white grey
– Siena red
– dark brown

Lateral closing component in pre-painted steel
– white grey
– Siena red
– dark brown

Snow barrier in pre-painted steel
– white-grey
– Siena red
– dark brown

Self-tapping galvanized fixing with prepainted Alublok diam. 25mm.
– white grey
– Siena red
– dark brown

Zinc-plated drill fixing with prepainted Alublok 25mm
– white-grey
– Siena red
– dark brown

For information about the product or to request a quote please fill out the form below.

I have read and accepted the privacy.

Tek28 is the corrugated metal sheet with 10 mm insulation, ideal for the realization of industrial and civil cladding and facades and for the renovation of old roofs. The polyurethane layer reduces the heat transmission of the sheet, producing a warm, ventilated roof effect. With the application also in the facade, it allows with a single product a double use, ideal also in renovations.

Minimum slope 7 %
Width 1000 mm
Useful width on site 893 mm
Standard lengths 2230/2580/3280/3980 mm
Material Prepainted steel

lateral overlapping of a corrugation and a half

fixing on wood

fixing on wall

ADVANTAGES

Excellent treadability

Hail damage reduction

Noise reduction

Condensation effect reduction

Thermal bridge elimination

Galvanic couples elimination

AVAILABLE COLOURS

SIMIL RAL 9002

White-Grey

SIMIL RAL 3009

Siena Red

SIMIL RAL 8017

Dark Brown

PREARRANGEMENT FOR THE OVERLAP

T = standard 200 mm

This picture is only given as an example and shows the final status of the product after the end insulating layer has been removed on the building yard (this is the case if more than one sheet is used for a pitch).
The removal of polyurethane is used for overlapping the sheets, and consists of pre-cutting the insulating layer with the application of adhesive tape on the inner surface of the metal sheet to facilitate the removal of polyurethane on site.

L’asportazione del poliuretano serve per il sormonto delle lastre, e consiste nel pretaglio dello strato isolante con applicazione  di nastro adesivo sulla faccia interna della lamiera metallica per facilitare l’asportazione del poliuretano in cantiere.

Laying direction

Consultation table for selecting the plate length:

length of the roof sheet length to use mm
4260 2230 2230
4610 2580 2230
4960 2580 2580
5310 3280 2230
5660 3280 2580
6010 3980 2230
6360 3280 3280
6640 2580 2230 2230
7060 3980 3280
7340 3280 2230 2230
7690 3280 2580 2230
8040 3280 2580 2580
8390 3280 3280 2230
8740 3980 2580 2580
9020 2580 2580 2230 2230
9440 3280 3280 3280
9790 3980 3980 2230
10140 3980 3280 3280
10420 3980 2580 2230 2230
10770 3980 2580 2580 2230
11120 3980 2580 2580 2580
11470 3980 3280 2580 2230
11540 3980 3980 3980

Straight translucent polycarbonate sheet, 1.1 mm thick, in neutral color for profile 28
– max. length 12m

Notched vertex ridge in pre-painted steel
– white grey
– Siena red
– dark brown

Steel flat ridge
– white grey
– Siena red
– dark brown

Notched wall/pitch connection in pre-painted steel
– white grey
– Siena red
– dark brown

Lateral closing component in pre-painted steel
– white grey
– Siena red
– dark brown

Snow barrier in pre-painted steel
– white-grey
– Siena red
– dark brown

Self-tapping galvanized fixing with prepainted Alublok diam. 25mm.
– white grey
– Siena red
– dark brown

Zinc-plated drill fixing with prepainted Alublok 25mm
– white-grey
– Siena red
– dark brown

For information about the product or to request a quote please fill out the form below.

Ho letto e accetto l'informativa sulla privacy.