ALUTECH DACH is a 5-corrugation roofing panel, made of two sheet-metal coverings joined together by a polyurethane insulating layer. The panels can be installed on any type of load bearing structure, especially those made with metal elements. The corrugation of the upper profile enhances the loading performance of the ALUTECH DACH panel, which can be applied on big supporting spans.
- Upper panel
- Side gasket.
- Expanded polyurethane.
- Lower panel.
| Profile height | 40 mm |
| Width | 1043 mm |
| Useful width | 1000 mm |
| Lengths | 4 â 5 â 6 – 13,50 mt |
| “S” Standard thicknesses | 30-40 mm |
| Minimum slope | 10% |
| Overlap | half a corrugation without support foot |
| Upper support standard material | prepainted steel |
| Bottom support standard material | prepainted steel |
| Recommended use | roofing |
lateral overlapping of a corrugation
fixing
AVAILABLE COLOURS
SIMIL RAL 9002
White-Grey
SIMIL RAL 3009
Siena Red
SIMIL RAL 8017
Dark Brown
PREARRANGEMENT FOR CUTTING THE INSULATION FOR OVERLAPPING OVERLAPPING
Precut on the bottom of the panel to facilitate removal of the insulation.
If panels of the same type are used (all with right overlap or all with left overlap) when covering the second pitch, the laying direction must be reversed.
In order to have the same laying direction, panels with left overlap for the first pitch and right overlap for the second pitch must be used.
Straight translucent polycarbonate sheet
Notched vertex ridge in pre-painted steel
Corrugation closure profile in prepainted steel
Notched wall/pitch connection in pre-painted steel
Lateral closing component in pre-painted steel
For information about the product or to request a quote please fill out the form below.
ALUTECH DACH is a 5-corrugation roofing panel, made of two sheet-metal coverings joined together by a polyurethane insulating layer. The panels can be installed on any type of load bearing structure, especially those made with metal elements. The corrugation of the upper profile enhances the loading performance of the ALUTECH DACH panel, which can be applied on big supporting spans.
- Upper panel
- Side gasket.
- Expanded polyurethane.
- Lower panel.
| Profile height | 40 mm |
| Width | 1043 mm |
| Useful width | 1000 mm |
| Lengths | 4 â 5 â 6 – 13,50 mt |
| “S” Standard thicknesses | 30-40 mm |
| Minimum slope | 10% |
| Overlap | half a corrugation without support foot |
| Upper support standard material | prepainted steel |
| Bottom support standard material | prepainted steel |
| Recommended use | roofing |
lateral overlapping of a corrugation
fixing
AVAILABLE COLOURS
SIMIL RAL 9002
White-Grey
SIMIL RAL 3009
Siena Red
SIMIL RAL 8017
Dark Brown
PREARRANGEMENT FOR CUTTING THE INSULATION FOR OVERLAPPING OVERLAPPING
Precut on the bottom of the panel to facilitate removal of the insulation.
If panels of the same type are used (all with right overlap or all with left overlap) when covering the second pitch, the laying direction must be reversed.
In order to have the same laying direction, panels with left overlap for the first pitch and right overlap for the second pitch must be used.
Straight translucent polycarbonate sheet
Notched vertex ridge in pre-painted steel
Corrugation closure profile in prepainted steel
Notched wall/pitch connection in pre-painted steel
Lateral closing component in pre-painted steel
For information about the product or to request a quote please fill out the form below.
