“Coppo” is a non-insulated corrugated metal sheet with a traditional roof tile profile, combining tradition and innovation through the appearance of classic tiles with the technology of metal. With the Coppo sheet, the roof becomes extremely lightweight compared to old solutions, significantly increasing the service life of the roofing system.
Technical Data
| Total width / effective width: 1039 mm / 985 mm. | |
| Standard lengths: 1600 mm, 2300 mm, 3000 mm, 4050 mm | |
| Initial / end section: 90 mm / 85–340 mm | |
| Sheet weight | In pre-painted steel: 5.7 kg/m²
In pre-painted aluminium: 3.2 kg/m² |
| Minimum slope: 15%. | |
| Material: Pre-painted steel, pre-painted aluminum |
Finishes
Standard: Coppo red
Antiqued coppo red
Antiqued sand
Features
Side overlap
half-wave side overlap
Recommended spacing
Il Coppo can be installed on metal or timber structures: the recommended support spacing is 350 mm.
Steep-pitched roofs
Il Coppo can be used on roofs with a minimum slope of 15% because, being manufactured in a single length, it has no overlaps and therefore ensures complete waterproofing.
Steep-pitched roofs
As Il Coppo is fixed to a prepared supporting framework, it has no application limits on any roof pitch, including mansards or other structures.
Steep-pitched roofs
As Il Coppo is fixed to a prepared supporting framework, it has no application limits on any roof pitch, including mansards or other structures.
Documentation
Contact us
Request information or a customized quote
"*" indicates required fields
